Calibration Baths

Exceptional performance and unbeatable value

Kambic can boast 25-years Experience in building high quality Calibration baths allowing you to select from an impressive range of 10 models featuring 4 different volumes and 2/3 distinctive temperature ranges.

Customised sizes and variation-unrivalled service

The exceptional precision is achieved through a sophisticated 2-cylinder system with a uniform vertical flow throughout the utilised portion of the tank, combined with a finely balanced high-performance microprocessor control loop.

Calibration baths are the ideal units for calibrating temperature sensors, transmitters or even complete temperature systems. Not only do they allow calibration of multiple systems at the same time, but also offer the added advantage of accommodating sensors of all shapes and sizes. Finally, there is an assurance that sensor and reference are always subjected to a uniform temperature.

Employing various cooling systems, depending on the model's temperature range. These can range from simple tap water cooling through to integrated compressors or even multi-stage cascade-compressors for the models with ultra-low temperature ranges.

Features:

• Forced fluid circulation
• An innovative circulation system enables a uniform and stable temperature across the entire operating cylinder
• The units are operated via an innovative and user friendly control panel which includes an LCD display, and offer configurable PID controller
• Visual and audible alarms in the event of a failure
• Resolution for temperature set-point 0.1°C
• Resolution for temperature display 0.01°C
• Dual protection system against uncontrolled over-temperature events:
  • Heating elements turn off automatically if measured temperature exceeds the set threshold by 5°C
  • Mechanical over-temperature device shuts off heating elements if temperature exceeds maximum allowed values
• Interior chamber manufactured from AISI 304 stainless steel
• Exterior panels made from powder-coated aluminized sheet, light grey (RAL7035)
• Software for chamber calibration via end user (password protected)
• Varaity of accessories available

Accessories:

Select from a large range of accessories and options, such as:

• Calibration certificate (10 different locations, 3 different temperatures)
• Additional & tailored lid
• LIG Holders (liquid in glass thermometer holder)
• Software for monitoring & history (PC control and data history)
• IQ/OQ documentation
• Ethernet interface
• USB interface
• Adjustable multi probe fixture
• Vertical fixture
• Foldable shelve
• External fluid level
• Additional local fume hood with fan
• Black body's
• Fluids for baths

	Typ:	Marking:	Temperature range:
1	Denatured Ethanol	DE	-90°C….0°C
2	Silicone oil	KDC 200.05	-40 °C ÷ 130 °C
3	Water	W	10 °C ÷ 95 °C
4	Silicone oil	KDC 200.20	10 °C ÷ 230 °C
5	Silicone oil	KDC 200.50	30 °C ÷ 278 °C

Available chamber types with the corresponding technical data sheets:

Product	Temperature range	Bath volume
OB-7/2	Standard	7 Liters
OB-7/2LT	Low	7 Liters
OB-7/2ULT	Ultra-Low	7 Liters
OB-22/2	Standard	22 Liters
OB-22/2LT	Low	22 Liters
OB-22/2ULT	Ultra-Low	22 Liters
OB-50/2	Standard	50 Liters
OB-50/2LT	Low	50 Liters
OB-15/2BB	Standard	15 Liters (Blackbody)
OB-15/2BBLT	Low	15 Liters (Blackbody)

We offer custom solutions – Please describe your specific requirements and we will offer you a tailored system!

Technical Downloads